CART
1-877-374-2696
Home > Point of Use Tankless > DHC Series

Stiebel Eltron DHC Series Tankless Water Heaters

Stiebel Eltron DHC Series Tankless Water Heaters

Manufactured by Stiebel Eltron in Germany, the DHC series tankless water heaters are built in an ISO 9001 certified factory. They are ideally suited for applications that require a low flow rate of hot water and have a constant flow rate, including bathroom sinks, kitchens, public washrooms, emergency eyewash stations, etc.

As with all of Stiebel Eltrons tankless water heaters, the DHC series are extremely efficient. Power to the units is regulated by a sophisticated water flow sensor, allowing the units to only receive power when the water is flowing. This eliminates the need to have hot water sitting waiting for use at all times, thereby avoiding standby thermal heat loss. Due to their diminutive stature the DHC series tankless water heaters can be installed in virtually any location, including in cabinets or closets close to the actual point of use.

Stiebel Eltron DHC Series Point-of-Use Tankless Water Heaters
DHC
3-1
Classic
DHC
3-2
Classic
DHC
4-2
Classic
DHC
4-3
Classic
DHC
5-2
Classic
DHC
6-2
Classic
DHC
8-2
Classic
DHC
10-2
Classic
KW 3.0 KW @ 120V 3.3 KW @ 240V
(2.5 KW @208V)
3.8 KW @ 240V
(2.9 KW @208V)
4.5 KW @ 277V 4.8 KW @ 240V
(3.6 KW @208V)
6.0 KW @ 240V
(4.5 KW @208V)
7.2 KW @ 240V
(5.4 KW @208V)
9.6 KW @ 240V
(7.2 KW @208V)
Voltage: 110-120 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
277 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
208-240 volts
single phase
50 - 60 Hz
Max. Amps: 25 AMPS @ 120V 14 AMPS @ 240V
(12 AMPS @208V)
16 AMPS @ 240V
(14 AMPS @208V)
17 AMPS @ 277V 20 AMPS @ 240V
(18 AMPS @208V)
25 AMPS @ 240V
(22 AMPS @208V)
30 AMPS @ 240V
(26 AMPS @208V)
40 AMPS @ 240V
(35 AMPS @208V)
Breakers Required:* 25 AMP @ 120V 15 AMPS @ 240V
(15 AMPS @208V)
20 AMPS @ 240V
(15 AMPS @208V)
20 AMPS @ 277V 20 AMPS @ 240V
(20 AMPS @208V)
25 AMPS @ 240V
(25 AMPS @208V)
30 AMPS @ 240V
(30 AMPS @208V)
40 AMPS @ 240V
(35 AMPS @208V)
Wiring:* Min. #10 AWG Copper Min. #14 AWG Copper Min. #12 AWG Copper Min. #12 AWG Copper Min. #12 AWG Copper Min. #10 AWG Copper Min. #8 AWG Copper Min. #8 AWG Copper
Dimensions: 14.25 x 7.9 x 4.1" (36 x 20 x 11 cm)
Weight: 4.6 lbs
(2.1 KG)
5.3 lbs
(2.4 KG)
5.3 lbs
(2.4 KG)
4.6 lbs
(2.1 KG)
4.6 lbs
(2.1 KG)
4.6 lbs
(2.1 KG)
5.3 lbs
(2.4 KG)
5.3 lbs
(2.4 KG)
Activation Flow Rate: 0.32 GPM
(1.2 LPM)
0.32 GPM
(1.2 LPM)
0.42 GPM
(1.6 LPM)
0.42 GPM
(1.6 LPM)
0.42 GPM
(1.6 LPM)
0.47 GPM
(1.8 LPM)
0.69 GPM
(2.6 LPM)
0.79 GPM
(3.0 LPM)
Energy Efficiency: 99%+
Pipe Fittings: 1/2" NPT
Max. Water Pressure: 150 psi
Warranty: Manufacturer's 3 Year Warranty
Safety: ETL Listed (US / Canada) - Independently tested to meet U.S. and Canadian safety standards
Protection: scald guard thermostat and thermal hi-limit cut-out switch
Stiebel Eltron
DHC-3-1
Classic
Stiebel Eltron
DHC-3-2
Classic
Stiebel Eltron
DHC-4-2
Classic
Stiebel Eltron
DHC-4-3
Classic
Stiebel Eltron
DHC-5-2
Classic
Stiebel Eltron
DHC-6-2
Classic
Stiebel Eltron
DHC-8-2
Classic
Stiebel Eltron
DHC-10-2
Classic