Found a Lower Price?
Request a Price Match
(we will price match any authorized
US or Canadian Distributor)
- Ground (3-6 days): included
- Express (2-3 days): $59.95
- Overnight: call 1-877-374-2696 for quote
There are currently no reviews for this product.
Be the first to write a review.
Factory Refurbished Stiebel Eltron DHC-E 12
This is a factory-reconditioned unit with 1 year manufacturer's warranty. Reconditioning and re-testing was performed by the manufacturer to its exacting specifications. There may be minor cosmetic blemishes (small scratches or scuffs) on the unit. We 100% guarantee that this unit will operate according to the manufacturer's specifications. This is an excellent opportunity to buy a brand name water heater at a significant discount to the cost of a new unit.
Stiebel Eltron's DHC-E 12 point-of-use electric tankless water heaters are sophisticated, energy efficient point-of-use water heaters. These reliable units offer a sleek design, temperature control, a 3-year warranty and energy efficiency with no venting required. DHC-E 12 water heaters have been used in kitchens and bathrooms for both residential and commerical purposes as well as for more specialized applications such as emergency eyewash stations.
The DHC-E 12 has been designed to detect incoming water temperature and flow rate in order to calculate the precise amount of electricity needed to heat the water to its thermostatically set temperature. This ability to monitor incoming water flow and temperature in real-time to dictate the unit's electrical draw is called flow-based power modulation technology, which is the same technology found in Stiebel Eltron's popular Tempra line of whole-house water heaters. Flow-based power modulation maximizes the heater's efficiency by only using the calculated amount of electricity to heat the water up to the user's set temperature - there is no wasted energy. This advanced microprocessor technology sets Stiebel Eltron's DHC-E point-of-use heaters apart from those manufactured by its competitors.
The Stiebel Eltron DHC-E series tankless water heaters are the most technologically advanced point-of-use tankless water heaters available on the market today.
in Gallons Per Minute
40°C (105°F) Output Temp
|Incoming Water Temp:||Flow Rate (GPM)|
|4°C (40°F)||1.3 GPM|
|7°C (45°F)||1.4 GPM|
|10°C (50°F)||1.5 GPM|
|13°C (55°F)||1.6 GPM|
|15°C (60°F)||1.8 GPM|
|18°C (65°F)||2.0 GPM|
|21°C (70°F)||2.3 GPM|
|24°C (75°F)||2.7 GPM|
|Stiebel Eltron DHC-E 12 Specifications|
|@ 240v||@ 208v|
|Thermostatically Controlled?||Yes, digital temperature control and full power modulation based on flow rate and incoming water temperature.|
|KW||12 KW @ 240v||9 KW @ 208v|
|Voltage:||208 - 240 volts / single phase / 50 - 60 Hz|
|Max. Amps:||50 AMPS @ 240v||44 AMPS @ 208v|
|Breakers Required:*||1 x 50 AMP breaker||1 x 60 AMP breaker|
|Wiring:*||Minimum #8 AWG Copper|
|Dimensions:||14.25 x 7.9 x 4.1" (36 x 20 x 11 cm)|
|Weight:||5.9 lbs (2.7 KG)|
|Pipe Fittings:||1/2" NPT|
|Activation Flow Rate:||0.29 GPM / 1.1 LPM|
|Max. Water Pressure:||150 psi (tested to 300 psi)|
|Warranty:||Manufacturer's 3 Year Warranty|
|Safety:||ETL Listed (US & Canada)|
|Protection:||microprocessor-based thermostatic temperature control (flow rate and temperature modulating) with thermal hi-limit cut-out switch|
* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Some codes require use of electrical sub-panel for installation, especially when heater is not mounted within line-of-sight of the main electrical panel. Wiring should be sized to maintain a voltage drop of less than 3% under load. Please consult your electrician for more details.
Be the first to write a review.